TOP SELLING TRACTOR PARTS

The TISCO Intake & Exhaust Manifold is a direct replacement for Ford 2N, 8N, and 9N tractors using OEM part number 9N9425. This combined intake and exhaust manifold restores proper engine breathing and exhaust flow on these classic Ford tractors. Gaskets are included for a complete installation.

• Replaces Ford OEM part number 9N9425
• Fits Ford Tractors: 2N, 8N, 9N
• Combined intake and exhaust manifold
• Gaskets included
• TISCO quality cast iron construction
• Confirm tractor model and OEM part number before ordering

A dependable TISCO replacement for classic Ford tractor engine restoration — gaskets included for a complete install.

The TISCO 11" x 28" rear tractor rim is a 6-loop demountable rim for compatible tractor rear wheel assemblies. Built to TISCO quality standards for reliable fit and long service life. Confirm tire size and tractor model compatibility before ordering.

• 11" x 28" demountable rear tractor rim
• 6 loop clamps
• TISCO quality construction
• Confirm tractor model and tire size compatibility before ordering

This Ford Medium Gray tractor and implement paint is manufactured by VanSickle — the same formulation previously sold under the TISCO brand. Whether labeled VanSickle or TISCO, the quality and color match are identical. Used on Ford tractors and implements from 1948 to 1964.

• Ford Medium Gray color match for 1948–1964 Ford tractors and implements
• Manufactured by VanSickle — same formulation as TISCO-branded paint
• Gallon size
• Cannot be sold or shipped to California

Confirm color match with your equipment before ordering. Not available for shipment to California.

This Ford Medium Gray tractor and implement paint aerosol is manufactured by VanSickle — the same formulation previously sold under the TISCO brand. Whether labeled VanSickle or TISCO, the quality and color match are identical. Used on Ford tractors and implements from 1948 to 1964. Sold as a 6-pack of aerosol cans.

• Ford Medium Gray color match for 1948–1964 Ford tractors and implements
• Manufactured by VanSickle — same formulation as TISCO-branded paint
• Aerosol can — sold as a 6-pack
• Cannot be sold or shipped to California

Confirm color match with your equipment before ordering. Not available for shipment to California.

The TISCO 10" x 28" rear tractor rim is a 6-loop demountable rim for compatible tractor rear wheel assemblies. Built to TISCO quality standards for reliable fit and long service life. Confirm tire size and tractor model compatibility before ordering.

• 10" x 28" demountable rear tractor rim
• 6 loop clamps
• TISCO quality construction
• Confirm tractor model and tire size compatibility before ordering

The TISCO 1/2" x 4" x 96" weld-on cutting edge is a flat single bevel replacement blade for loader buckets, box blades, land planes, and other ground-engaging equipment. The weld-on base design allows for direct attachment to the implement's cutting edge base, and the single bevel profile delivers clean, aggressive cutting action in soil, gravel, and material handling applications.

• 1/2" thick x 4" wide x 96" long (8 feet)
• Flat single bevel edge for clean, aggressive cutting
• Weld-on base for direct attachment to implement cutting edge
• For use on loader buckets, box blades, land planes, and ground-engaging equipment
• TISCO quality steel construction for long service life

Confirm implement cutting edge dimensions before ordering. Welding required for installation.

The TISCO 12" x 24" rear tractor rim is a 6-loop demountable rim designed for 13 x 24 or 14 x 24 tires. The 6 loop clamps provide secure tire retention, and the demountable design allows for tire changes without removing the rim from the axle. Loop-to-loop measurement is 10", with 20" across the center.

• 12" x 24" demountable rear tractor rim
• For use with 13 x 24 or 14 x 24 tires
• 6 loop clamps for secure tire retention
• 10" loop to loop, 20" across the center
• TISCO quality construction
• Confirm tractor model and tire size compatibility before ordering

Ditch the aging A6 compressor and upgrade your John Deere tractor to a modern Sanden-style A/C system with this complete, all-in-one conversion kit from AP Air. Everything you need for a clean, reliable installation is included — no sourcing individual parts.

What's Included (SKU: QFS-990-403K)

• Sanden-Style Compressor Conversion Kit (990-403) — replaces the original A6 piston compressor with a lightweight, efficient rotary unit
• Receiver Drier — new desiccant to keep moisture out of the system
• Expansion Valve — controls refrigerant flow for optimal cooling performance
• O-Ring Kit — all seals needed for a leak-free installation

Designed to use your original belt and hoses — no custom fabrication or hose rerouting required.

Compatible John Deere Models

• John Deere 4040 & 4040 Euro
• John Deere 4230
• John Deere 4240, 4240 Euro & 4240S
• John Deere 4350
• John Deere 4430
• John Deere 4440
• John Deere 7720
• And more — contact us to confirm fitment on your specific model

Why Upgrade from the A6 Compressor?

The original A6 piston compressor is heavy, inefficient, and increasingly difficult to find parts for. The Sanden rotary compressor offers:

• Less engine load — lighter weight means less parasitic drag
• Better cooling efficiency — especially at low RPMs during field work
• R134a compatibility — works with the modern, readily available refrigerant standard
• Widely serviceable — any shop with modern A/C equipment can service a Sanden system

Installation Notes

• Flush the system before installing to remove residual mineral oil from the old A6 system
• Use PAG oil specified for the Sanden compressor — do not mix with old mineral oil
• Replace all O-rings with HNBR (green) O-rings rated for R134a (included in kit)
• Have the system professionally evacuated and recharged with R134a refrigerant

This Ford Red Vermillion tractor and implement paint is manufactured by VanSickle — the same formulation previously sold under the TISCO brand. Whether labeled VanSickle or TISCO, the quality and color match are identical. The correct red for Ford tractors and implements.

• Ford Red Vermillion color match for Ford tractors and implements
• Manufactured by VanSickle — same formulation as TISCO-branded paint
• Gallon size
• Cannot be sold or shipped to California

Confirm color match with your equipment before ordering. Not available for shipment to California.

The TISCO 12" x 28" rear tractor rim is a 6-loop demountable rim for a wide range of Ford and other tractor models. Replaces OEM part numbers 313197 and 31319729Z.

Fits Tractors:

• 80 and H.D. Industrial (optional) — 1958–1962
• 3055, 3100, 3120, 3150, 3190, 3300, 3310, 3400, 3500 — 1965–1975
• 3600 — 1975–1981
• 4100, 4600 — 1978–1981
• 2310, 2610, 3610, 4110, 4610, 340A, 340B (not for square disc) — 1981–12/1985
• 3230, 3930 (not for square disc) — 3/1990–1994

• Replaces OEM part numbers 313197, 31319729Z
• 6 loop clamps for secure tire retention
• TISCO quality construction
• Confirm tractor model, year, and disc type before ordering

The TISCO Ammeter Gauge is a direct replacement for Ford tractors using OEM part number A0NN10670A. This non-luminous 30-0-30 ampere gauge monitors the charging system and fits a standard 2" diameter instrument panel hole. Replaces Ford OEM part number FAD10850A.

• Replaces Ford OEM part numbers A0NN10670A and FAD10850A
• 30-0-30 ampere range
• Non-luminous dial
• Fits 2" diameter instrument panel hole
• TISCO quality construction for long-term reliability
• Confirm Ford tractor model and OEM part number before ordering

A straightforward, reliable ammeter gauge replacement for classic Ford tractors — confirm part numbers A0NN10670A / FAD10850A match your tractor before ordering.

The AP Air 990-4212 is a complete R134a air conditioning conversion kit for John Deere 4040, 4230, 4240, 4430, and 4440 series tractors. This kit converts your original A6 compressor system to the modern, more efficient R134a refrigerant standard — restoring cab cooling performance and eliminating the need for obsolete R12 refrigerant.

Fits: John Deere 4040, 4040 Euro, 4230, 4240, 4240 Euro, 4240S, 4430, 4440, 4440 Euro, and more

• Includes: Compressor, 10-piece hose kit, receiver drier, expansion valve, and O-rings
• Does not include quick couplers — must reuse originals or purchase separately
• Converts original A6 system to R134a refrigerant
• AP Air quality construction for reliable cab cooling restoration
• SKU: 990-4212

Confirm tractor model and serial number compatibility before ordering. Quick couplers not included.