ACE HYDRAULIC DRIVEN CENTRIFUGAL PUMP - 1-1/4 INLET X 1" DISCHARGE
Product Features
-
MOUNTING VERSATILITY: The location of the pump is not tied to the PTO or engine drive shaft; the pump can be mounted in a variety of locations to suit application requirements.-
CUSTOMIZED PERFORMANCE: The performance is dependent on the supply of hydraulic oil to the motor and not necessarily tied to engine speed. A hydraulic driven pump can produce higher pressures than PTO or belt driven pumps.
They can also hold constant pressure at varying engine speeds on closed center hydraulic systems. -
EASY MAINTENANCE: On a hydraulic driven pump there are no belts to align or break. Separate pump and hydraulic motor shafts simplify repair and replacement. Two main pump bearings support shaft loads. All pumps are equipped with easily replaceable Viton® mechanical seals.
The Ace Internet Hydraulic Selection Guide is here to help in finding the proper hydraulic pump for your tractor.
-
The farm industry standard since 1969.
- The 204 motor requires 4 GPM(15.1 LPM) maximum hydraulic fluid input.
Recommended for:
- Pressure Compensating Closed Center Systems
- Open Center Systems up to 13 GPM using internal needle valve bypass
Product Specifications
| Pump Type | Centrifugal Pump |
|---|---|
| Motor | Hydraulic |
| Max PSI Rating | 100 PSI |
| Impeller | Valox |
| Pump Body | Cast Iron |
| Pump Seal Material | Viton Carbon / Ceramic Seal |
| Max Gallons Per Minute | 85 GPM |
| Pump Drive | Hydraulic Motor |
| Pump Port Size | 1-1/4 Inlet x 1 Inch NPT Discharge |
| Hydraulic Motor | 204 Motor Requires 4.0 GPM Hydraulic Flow |
| UPC | 6.81E+11 |
| Brand | Ace |