Find Your Parts
Search
With a wide variety of tillage tools and parts like field cultivators, sweeps, tines, furrowers, plow shares, moldboards, shins, chisel and subsoiler points, ripper points, oil bath bearings, hipper parts and other tillage tools, Quality Farm Supply has everything you need to break ground, without breaking the bank. Our products fit models like Allis-Chalmers, Case IH, John Deere, Krause, Rome, Sundance, Towner, Sunflower and more.
Osmundson
Disc Blade - 20" x 3/16", Notched, 1" Square Axle
SKU:
114-203602N
$48.49
In stock, 315 units
WEAR SHIN FOR KMC
SKU:
972-KMC100
Will replace KMC 17-057-004. 5/16 inch x 1-3/8 inch spirol pin (3) required KMC 17-050-022
$16.90
In stock, 503 units
Osmundson
22 INCH X 3/16 INCH SAMURAI BLADE WITH 1-3/4 INCH ROUND CENTER HOLE
SKU:
114-223618SSA
24 Wave Serrated Edge with 1-3/4 inch Shallow Concavity for Sunflower Vertical Till. Replaces SN16845.
$79.08
In stock, 41 units
OLIVER / WHITE RIGHT HAND SHIN FOR R419 / R619 SERIES AND FORD 150 SERIES
SKU:
686-S7490
$27.82
In stock, 24 units
Osmundson
Disc Blade - 22" x 1/4", Smooth, 1-1/8" Square x 1-1/2" Round Axle
SKU:114-22141706P
$57.02
In stock, 107 units
AgSmart
1-1/2 INCH SQUARE AXLE RETAINING WASHER FOR CASE IH
SKU:
444-SMA193929
Retaining Washer. Fits 330, 335VT - 3950, 340, 345, 370, 375 Disk and 690, 870, 875 Ripper. Will replace 193929A1. 79mm ID, 109mm OD, 3mm thick.
$4.93
In stock, 239 units
AgSmart
1-1/2 INCH X 57.9 INCH SQUARE AXLE
SKU:
868-SMA549978
Replaces IH 549978R1
$220.79
In stock, 32 units
AgSmart
1-3/8 INCH SQUARE AXLE END WASHER FOR W&A
SKU:
864-SMA1494
End washer, 1 3/8" x 4 1/4" o.d.
$9.87
In stock, 290 units
AgSmart
AgSmart Ripper Shank - 6" x 1/4" for Case IH, 33020046, DMI
SKU:
972-33020046
3/4 inch No-Till Shank for Case IH and DMI EcoloTill 2500, 2500 Rip-Strip, 2500 Rip-Bed prior to 2008. Replaces 33020046.
For units built after 2008, order 972-87665693
$117.96
Sold out
AgSmart
AgSmart Disc Scraper Blade Assembly for Case IH & International 483139R92
SKU:864-CB480AL
Left hand front (right rear) gang scraper assembly for Model 480.
Includes arm and scraper blade.
$54.99
In stock, 92 units
LISTER SHARE 14" FOR JOHN DEERE - DURAFACED
SKU:
194-287DF
14'X5/16 JOHN DEERE LISTER SHARE HARDFACED...HAS 4 1/4 INCH BOLT SPACING
$72.85
Only 1 unit left