PICK-UP TEETH

• Fits Case IH Hay Baler(s): RB444, RB454, RB455A, RB464, RB554, RB564, RBX341, RBX441, RBX442, RBX443, RBX451, RBX452, RBX453, RBX461, RBX462, RBX463, RBX552, RBX553, RBX561, RBX562, RBX563
• Fits New Holland Hay Baler(s): 268, 269, 272, 273, 275, 276, 277, 278, 281, 282, 283, 285, 286, 290, 310, 311, 315, 316, 320, 326, 420, 425, 426, 430, 500, 505, 515, 565, 570, 575, 585, 630, 634, 638, 640, 644, 648, 650, 654, 658, 660, 664, 678, 688, 845, 846, 847, 848, 850, 851, 852, 853, 1281, 1282, 1283, 1290, 1425, 1426, BB930AP, BR7050, BR7060, BR7070, BR7080, BR7090, BR730, BR730A, BR740, BR740A, BR750, BR750A, BR770, BR770A, BR780, BR780A, BU7060, Roll-Belt 450, Roll-Belt 460
• Fits New Holland Windrower(s): 27P, 340W, 707W, 717W, 728, 770W, 790W, 880W, 890W, 919W3, 919W4, 990W, 1895W
• Replaces Case IH & New Holland OEM Number(s): 131673, 86551419, 86632007, 87394242, 80916061. 84822014, 87394243
• .188" Wire diameter

The AgSmart Hay Rake Wheel Tooth is a heavy-duty 7mm replacement tine engineered to fit a wide range of wheel rake brands. Whether you're running DuraBilt, Enorossi, John Deere, Tonutti, Vermeer, or Vicon equipment, this tooth delivers the consistent tine action needed for clean, efficient windrow formation.

• Fits DuraBilt, Enorossi, John Deere, Tonutti, Vermeer, and Vicon wheel rakes
• Replaces part numbers P20BG003, P20BG004, 36133HD, and E95724
• 7mm wire diameter for strength and durability
• Dimensions: 17-1/2" x 10" x 6"
• Drop-in fit — no modifications required

A versatile, high-quality tine that keeps your rake in the field and your hay moving.

Square wire version see SMA part number 804-FH304576

Baler tooth, round wire, used with the MEGA pickups. 

The AgSmart Baler Pickup Tooth is a direct replacement for John Deere square baler pickup assemblies using OEM part number E41833. Built to match OEM specifications for reliable crop pickup performance across a wide range of John Deere square baler models.

• Replaces John Deere OEM part number E41833
• AgSmart quality construction for durability through a full baling season
• Fits John Deere Square Balers: 327, 328, 336, 337, 338, 346, 347, 348, 349, 359, 459, 466, 467, 468
• Confirm OEM part number E41833 and baler model before ordering

Keep your pickup running clean all season — confirm part number E41833 matches your John Deere square baler before ordering.

• Fits New Holland Baler(s) 65, 67, 68, 69, 78, 178, 268, 269, 270, 271, 272, 273, 276, 310, 311
• Replaces New Holland OEM Number(s) 127566, PMNH-1B, A-96NH1B, 96NH1B, TENH1B
• Tine Length: 5.75"
• Coil O.D.: 1.5"
• Tine Gap: 4"

John Deere Round Baler Pick Up Tooth - Replaces E74678 / Used on 430 530 330 335 375 435 535

Replaces Freeman number F1226.

• Fits John Deere Baler(s) 14T, 24T, 214T, 224WS
• Replaces John Deere OEM Number(s) 276SE
• Tine Length: 6.75"
• Coil O.D.: 1.60"
• Tine Gap: 3.812"