Depth Control Handle for John Deere, N282710
864-SMA282710
Fits John Deere drills 1560, 1590, 1690, 1835, 1860, 1890, 1895, 1990
Replaces John Deere OEM numbers AN282710, N282710
Depth Control Spring for John Deere, M82163
864-SMA82163
Fits John Deere air drills 1560, 1590, 1690, 1835, 1860, 1890, 1895, 1990
Replaces John Deere OEM number M82163
Control Arm - Left for John Deere, AN282109
864-SMA282109
Depth Conrol Arm, Left Hand, Ffor JD Air Drill 1560, 1590, 1690, 1835, 1860, 1890, 1895, 1990. Replaces AN282109
AgSmart
AgSmart Pivot Pin for John Deere, N282536
864-SMA282536
Main Arm Pivot Pin. Used on models 1560, 1590, 1690, 1835, 1860, 1890, 1895 and 1990. 1.25 inch OD, 5.24 inch Long. Will replace JD N282536.
AgSmart
AgSmart Gauge Wheel Arm & Shaft for John Deere, AA73951
864-SMA73951
- Fits John Deere Drill(s): 1560, 1565, 1590, 1690, 1835, 1860, 1890, 1895, 1990
- Replaces John Deere OEM Number(s): AA73951, AN282117
AgSmart
AgSmart Closing or Press Wheel Bushing for John Deere, N219547
864-SMA219547
Outer bushing for opener and wheel arms. Fits 750 S/N 3835 up, 1560, 1590, 1850, 1860, 1890, 1895, 1990. 1.10 inch ID, 1.378 inch OD, .69 inch Long. Will replace JD N219547.
AgSmart
AgSmart Closing Wheel Arm Bushing for John Deere, N280648
864-SMA280648
Top inner bushing for closing wheel arm on 750 S/N 6001 up, 1560, 1590, 1850, 1860, 1890, 1895, 1990. .641 inch ID, 1 inch OD, 3.37 inch Long. Will replace JD N280648.
AgSmart
AgSmart Press Wheel Arm Bushing - Top, Inner for John Deere, N284086
864-SMA284086
Top inner bushing for press wheel arm on 750A, 1560, 1565, 1590, 1690, 1835, 1860, 1890, 1895, 1990. .641 inch ID, 1 inch OD, 2.37 inch Long. Will replace JD N284086.
Blade Depth Control Arm for John Deere AN282108 - Right
SKU:864-SMA282108
Depth Conrol Arm, Right Hand, Ffor JD Air Drill 1560, 1590, 1690, 1835, 1860, 1890, 1895, 1990. Replaces AN282108
Depth Control Cover for John Deere, N283120
864-SMA283120
Depth Control Cover / Depth Gauge Plate for JD Drills 1560, 1590, 1690, 1835, 1860, 1890, 1895, 1990. Replaces N283120
AgSmart
AgSmart Bushing - Top Drill Main Arm for John Deere, N283636
SKU:864-SMA283636
- Fits John Deere 1560, 1590, 1690, 1835 ,1860, 1890, 1895, 1990
- Replaces OEM John Deere Number(s): N283636
- Inner Diameter: 1.257"
- Outer Diameter: 1.628"
- Length: 1.0"
Control Arm Lock Nut for John Deere, K40003
864-SMA40003
Lock Nut for Control Arms AN282108 and AN282109. Fits 1560, 1590, 1690, 1835, 1860, 1890, 1895, 1990. Replaces K40003