ROTARY CUTTER TAIL WHEELS AND PARTS

AgSmart 4 X 8 ROTARY CUTTER TAIL WHEEL SKU: 016-TW484
Fits Alamo 373024H, Bush Hog 500BH, Ford 220247, Hardee C40-RC, Howse LML311A, John Deere AW30716, King Kutter KK4X8, Land Pride 814-058C, Modern 401-0048, New Holland MAG103D In stock, 131 units

MOWER TAIL WHEEL 6X9 5 BOLT 5.5" SKU: 016-TW695
21" OD, 12.8" Rim OD, 5 bolt holes on 5.5" circle, 4" pilot hole. Fits Alamo 373024H, Bush Hog 294, John Deere AW30747, Land Pride 814-265C, Servis Rhino 025200, Sidewinder 17122SW, Terrain King 025200, Woods 1017040. In stock, 523 units

AgSmart 4 X 8 ROTARY CUTTER TAILWHEEL, HUB & FORK ASSEMBLY WITH CAST IRON HUB - 1-1/2" PIN SKU: 375-484TWA
Uses F003 fork, TW484 wheel and 281101 cast iron hub with Tapered Roller Bearings In stock, 182 units

AgSmart 4 X 8 ROTARY CUTTER TAILWHEEL, HUB & FORK ASSEMBLY WITH CAST IRON HUB - 1-1/4" PIN WITH 3/4" AXLE BOLT SKU: 375-348125
Uses F002 Fork, TW484 wheel and 28012 fabricated hub with Bushings for 3/4" Axle  In stock, 83 units

AgSmart BEARING KIT FOR TAIL WHEEL HUB. CONTAINS L44643 / L44610 BEARINGS, TWO SEALS AND SPACERS SKU: 016-H2P
Includes two L44643 bearing cones, two 906282 (12407) seals, two L44610 cups and two 911251 spacers. Will replace TISCO RCTWK-3. In stock, 207 units

AgSmart 1" BUSHING FOR TAIL WHEEL HUB SKU: 688-B1
BUSHING, 1" INSIDE DIAMETER. ORDER 1" BUSHINGS SEPARATELY AND INSTALL IN HUB 63813 TO RETROFIT MANY OTHER SHORT LINE MODELS. 2 USED. In stock, 32 units

4 BOLT CAST IRON TAIL WHEEL HUB SKU: 982-281101
3.62" Pilot Agricultural Wheel Hub with Cups for Rotary Cutter.   Other components purchased separately.Uses 016-H2P bearing kit. In stock, 135 units

AgSmart 4 X 8 ROTARY CUTTER TAIL WHEEL, HUB & FORK ASSEMBLY WITH FABRICATED HUB - 1 INCH PIN SKU: 375-348150

Uses F003 fork, TW484 wheel and 28016 fabricated hub with Bushings

In stock, 11 units

AgSmart 6 X 9 MOWER TAIL WHEEL - 4 BOLT HOLES ON 5" CIRCLE SKU: 016-TW694
In stock, 83 units

AgSmart BUSHING, 3/4" I.D., 1.380" O.D., 2 USED SKU: 688-B34
Bushing for 28000 Tail Wheel Hub. 1 3/8" O.D. x 3/4" I.D. In stock, 841 units

AgSmart MOWER DECK STABILIZER KIT. CONTAINS 2 BRACKETS AND 2 CHAINS SKU: 873-159335
Stabilizer Kit for Mower Deck. Has 1/4" proof coil chain, 1175# Working load limit, 1/4" thick plates. Contains two brackets and two chains with smaller brackets. In stock, 60 units

AgSmart FABRICATED ROTARY MOWER TAILWHEEL HUB - LESS BUSHINGS SKU: 688-28000
Fabricated Mower Tail Wheel Hub. Has four bolt holes on 5" circle. Includes 1/2" - 20 wheel studs, lock washers, nuts, and grease zerk.Uses two oil impregnated bushings.. See B58, B34 or B1 for bushings.Hub with Bushings installed available as follows:688-28012 with 3/4" Bushings688-28016 with 1" Bushings   In stock, 203 units