AgSmart Rotary Cutter Tail Wheel - 6" x 9", 5 Bolt Holes on 5-1/2" Circle for Bush Hog 294SP, John Deere AW30747, AW30717, Woods 1017040
SKU: 016-TW695
$159.99
In stock, 510 units
AgSmart
4 X 8 ROTARY CUTTER TAIL WHEEL, HUB & FORK ASSEMBLY WITH CAST IRON HUB - 1-1/2" PIN
SKU: 375-484TWA
Uses F003 fork, TW484 wheel and 281101 cast iron hub with Tapered Roller Bearings
$242.86
In stock, 237 units
AgSmart
4 X 8 ROTARY CUTTER TAIL WHEEL, HUB & FORK ASSEMBLY WITH CAST IRON HUB - 1-1/4" PIN WITH 3/4" AXLE BOLT
SKU: 375-348125
Uses F002 Fork, TW484 wheel and 28012 fabricated hub with Bushings for 3/4" Axle
$181.99
In stock, 33 units
AgSmart
BEARING KIT FOR TAIL WHEEL HUB. CONTAINS L44643 / L44610 BEARINGS, TWO SEALS AND SPACERS
SKU: 016-H2P
Includes two L44643 bearing cones, two 906282 (12407) seals, two L44610 cups and two 911251 spacers. Will replace TISCO RCTWK-3.
$20.63
In stock, 145 units
AgSmart
1" BUSHING FOR TAIL WHEEL HUB
SKU: 688-B1
BUSHING, 1" INSIDE DIAMETER. ORDER 1" BUSHINGS SEPARATELY AND INSTALL IN HUB 63813 TO RETROFIT MANY OTHER SHORT LINE MODELS. 2 USED.
BUSHING, 1" INSIDE DIAMETER. ORDER 1" BUSHINGS SEPARATELY AND INSTALL IN HUB 63813 TO RETROFIT MANY OTHER SHORT LINE MODELS. 2 USED.
$4.46
In stock, 68 units
4-BOLT CAST IRON HUB FOR ROTARY CUTTERS - INCLUDES BEARING CUPS
SKU: 982-281101
3.62" Pilot Agricultural Wheel Hub with Cups for Rotary Cutter. Other components purchased separately.
Uses 016-H2P bearing kit.
$48.09
In stock, 125 units
AgSmart
4 X 8 ROTARY CUTTER TAIL WHEEL, HUB & FORK ASSEMBLY WITH FABRICATED HUB - 1 INCH PIN
SKU: 375-348150
Uses F003 fork, TW484 wheel and 28016 fabricated hub with Bushings
$225.71
In stock, 13 units
AgSmart
6 X 9 MOWER TAIL WHEEL - 4 BOLT HOLES ON 5" CIRCLE
SKU: 016-TW694
$171.17
In stock, 67 units
AgSmart
BUSHING, 3/4" I.D., 1.380" O.D., 2 USED
SKU: 688-B34
Bushing for 28000 Tail Wheel Hub. 1 3/8" O.D. x 3/4" I.D.
Bushing for 28000 Tail Wheel Hub. 1 3/8" O.D. x 3/4" I.D.
$2.99
In stock, 887 units
AgSmart
MOWER DECK STABILIZER KIT. CONTAINS 2 BRACKETS AND 2 CHAINS
SKU: 873-159335
Stabilizer Kit for Mower Deck. Has 1/4" proof coil chain, 1175# Working load limit, 1/4" thick plates. Contains two brackets and two chains with smaller brackets.
Stabilizer Kit for Mower Deck. Has 1/4" proof coil chain, 1175# Working load limit, 1/4" thick plates. Contains two brackets and two chains with smaller brackets.
$35.84
In stock, 7 units
AgSmart
4-BOLT FABRICATED HUB FOR ROTARY CUTTERS - NO BUSHINGS
SKU: 688-28000
Has four bolt holes on 5" circle. Includes 1/2" - 20 wheel studs, lock washers, nuts, and grease zerk.
Has four bolt holes on 5" circle. Includes 1/2" - 20 wheel studs, lock washers, nuts, and grease zerk.
Uses two oil impregnated bushings.. See B58, B34 or B1 for bushings.
Hub with Bushings installed available as follows:
- 688-28012 with 3/4" Bushings
- 688-28016 with 1" Bushings
$26.74
In stock, 231 units