Find Your Parts
Select Make
Select Equipment Type
Select Model
Select Category
Select Subcategory
Search
AgSmart
AgSmart Rotary Cutter Tail Wheel for Bush Hog 294SP, John Deere AW30747, AW30717, Woods 1017040
Rated 4.0 out of 5 stars
1 Review
016-TW695
6" x 9", 5 Bolt Holes on 5-1/2" Circle
$159.99
Sold out
AgSmart
AgSmart Rotary Cutter Tail Wheel, Hub & Fork Assembly for Bush Hog 12269BH - Cast Iron Hub, 1-1/2" Pin, 1" Axle Bolt
SKU:
375-484TWA
Uses F003 fork, TW484 wheel and 281101 cast iron hub with Tapered Roller Bearings
$239.99
In stock, 57 units
AgSmart
AgSmart Rotary Cutter Tail Wheel, Hub & Fork Assembly for Bush Hog 95545 - Cast Iron Hub, 1-1/4" Pin, 3/4" Axle Bolt
SKU:
375-348125
Uses F002 Fork, TW484 wheel and 28012 fabricated hub with Bushings for 3/4" Axle
$181.99
In stock, 73 units
AgSmart
BEARING KIT FOR TAIL WHEEL HUB. CONTAINS L44643 / L44610 BEARINGS, TWO SEALS AND SPACERS
SKU:
016-H2P
Includes two L44643 bearing cones, two 906282 (12407) seals, two L44610 cups and two 911251 spacers. Will replace TISCO RCTWK-3.
$20.63
In stock, 57 units
AgSmart
1" BUSHING FOR TAIL WHEEL HUB
SKU:
688-B1
BUSHING, 1" INSIDE DIAMETER. ORDER 1" BUSHINGS SEPARATELY AND INSTALL IN HUB 63813 TO RETROFIT MANY OTHER SHORT LINE MODELS. 2 USED.
$4.46
In stock, 432 units
Tail Wheel Hub for Bush Hog Rotary Cutters 1311BH - Bearing Cups Included
SKU:
982-281101
3.62" Pilot Agricultural Wheel Hub with Cups for Rotary Cutter. Other components purchased separately.
Uses 016-H2P bearing kit.
$49.99
In stock, 34 units
AgSmart
AgSmart Rotary Cutter Tail Wheel, Hub & Fork Assembly for Bush Hog 12269 - Fabricated Hub, 1-1/2" Pin, 1" Axle Bolt
SKU:
375-348150
Uses F003 fork, TW484 wheel and 28016 fabricated hub with Bushings
$225.71
In stock, 24 units
AgSmart
BUSHING, 3/4" I.D., 1.380" O.D., 2 USED
SKU:
688-B34
Bushing for 28000 Tail Wheel Hub. 1 3/8" O.D. x 3/4" I.D.
$2.99
In stock, 541 units
AgSmart
MOWER DECK STABILIZER KIT. CONTAINS 2 BRACKETS AND 2 CHAINS
SKU:
873-159335
Stabilizer Kit for Mower Deck. Has 1/4" proof coil chain, 1175# Working load limit, 1/4" thick plates. Contains two brackets and two chains with smaller brackets.
$35.84
Sold out
AgSmart
AgSmart Rotary Cutter Tail Wheel Hub for Fred Cain & Sidewinder 75416HLB
SKU:
688-28000
Has four bolt holes on 5" circle. Includes 1/2" - 20 wheel studs, lock washers, nuts, and grease zerk.
Uses two oil impregnated bushings.. See B58, B34 or B1 for bushings.
Hub with Bushings installed available as follows:
- 688-28012 with 3/4" Bushings
- 688-28016 with 1" Bushings
$26.74
In stock, 678 units