Find Your Parts
Search
AgSmart
AgSmart Rotary Cutter Tail Wheel for Bush Hog 294SP, John Deere AW30747, AW30717, Woods 1017040
Rated 4.0 out of 5 stars
1 Review
016-TW695
6" x 9", 5 Bolt Holes on 5-1/2" Circle
$159.99
Sold out
AgSmart
AgSmart Rotary Cutter Tail Wheel, Hub & Fork Assembly for Bush Hog 12269BH - Cast Iron Hub, 1-1/2" Pin, 1" Axle Bolt
SKU:
375-484TWA
Uses F003 fork, TW484 wheel and 281101 cast iron hub with Tapered Roller Bearings
$239.99
In stock, 12 units
AgSmart
AgSmart Rotary Cutter Tail Wheel, Hub & Fork Assembly for Bush Hog 95545 - Cast Iron Hub, 1-1/4" Pin, 3/4" Axle Bolt
SKU:
375-348125
Uses F002 Fork, TW484 wheel and 28012 fabricated hub with Bushings for 3/4" Axle
$181.99
In stock, 33 units
AgSmart
BEARING KIT FOR TAIL WHEEL HUB. CONTAINS L44643 / L44610 BEARINGS, TWO SEALS AND SPACERS
SKU:
016-H2P
Includes two L44643 bearing cones, two 906282 (12407) seals, two L44610 cups and two 911251 spacers. Will replace TISCO RCTWK-3.
$20.63
In stock, 84 units
AgSmart
1" BUSHING FOR TAIL WHEEL HUB
SKU:
688-B1
BUSHING, 1" INSIDE DIAMETER. ORDER 1" BUSHINGS SEPARATELY AND INSTALL IN HUB 63813 TO RETROFIT MANY OTHER SHORT LINE MODELS. 2 USED.
$4.46
In stock, 402 units
Tail Wheel Hub for Bush Hog Rotary Cutters 1311BH - Bearing Cups Included
SKU:
982-281101
3.62" Pilot Agricultural Wheel Hub with Cups for Rotary Cutter. Other components purchased separately.
Uses 016-H2P bearing kit.
$49.99
In stock, 13 units
AgSmart
AgSmart Rotary Cutter Tail Wheel, Hub & Fork Assembly for Bush Hog 12269 - Fabricated Hub, 1-1/2" Pin, 1" Axle Bolt
SKU:
375-348150
Uses F003 fork, TW484 wheel and 28016 fabricated hub with Bushings
$225.71
In stock, 13 units
AgSmart
BUSHING, 3/4" I.D., 1.380" O.D., 2 USED
SKU:
688-B34
Bushing for 28000 Tail Wheel Hub. 1 3/8" O.D. x 3/4" I.D.
$2.99
In stock, 531 units
AgSmart
MOWER DECK STABILIZER KIT. CONTAINS 2 BRACKETS AND 2 CHAINS
SKU:
873-159335
Stabilizer Kit for Mower Deck. Has 1/4" proof coil chain, 1175# Working load limit, 1/4" thick plates. Contains two brackets and two chains with smaller brackets.
$35.84
Sold out
AgSmart
AgSmart Rotary Cutter Tail Wheel Hub for Fred Cain & Sidewinder 75416HLB
SKU:
688-28000
Has four bolt holes on 5" circle. Includes 1/2" - 20 wheel studs, lock washers, nuts, and grease zerk.
Uses two oil impregnated bushings.. See B58, B34 or B1 for bushings.
Hub with Bushings installed available as follows:
- 688-28012 with 3/4" Bushings
- 688-28016 with 1" Bushings
$26.74
In stock, 624 units