3/16-24 x 1-1/2" hex head, grade 5, plain finish. .21 shank. Nuts are 3/16-24, steel, flanged hex locknut, zinc plated.
Priced by the pack. Package contains 10 nuts and bolts.
- Fits Case IH Hay Baler(s): RB444, RB454, RB455A, RB464, RB554, RB564, RBX341, RBX441, RBX442, RBX443, RBX451, RBX452, RBX453, RBX461, RBX462, RBX463, RBX552, RBX553, RBX561, RBX562, RBX563
- Fits New Holland Hay Baler(s): 268, 269, 272, 273, 275, 276, 277, 278, 281, 282, 283, 285, 286, 290, 310, 311, 315, 316, 320, 326, 420, 425, 426, 430, 500, 505, 515, 565, 570, 575, 585, 630, 634, 638, 640, 644, 648, 650, 654, 658, 660, 664, 678, 688, 845, 846, 847, 848, 850, 851, 852, 853, 1281, 1282, 1283, 1290, 1425, 1426, BB930AP, BR7050, BR7060, BR7070, BR7080, BR7090, BR730, BR730A, BR740, BR740A, BR750, BR750A, BR770, BR770A, BR780, BR780A, BU7060, Roll-Belt 450, Roll-Belt 460
- Fits New Holland Windrower(s): 27P, 340W, 707W, 717W, 728, 770W, 790W, 880W, 890W, 919W3, 919W4, 990W, 1895W
- Replaces Case IH & New Holland OEM Number(s): 131673, 86551419, 86632007, 87394242, 80916061. 84822014, 87394243
- .188" Wire diameter
5/16"-18 x 2" hex head, grade 5, plain finish. .312" shank. Nuts are 5/16"-18, steel, hex locknut, zinc plated.
Priced by the pack. Package contains 10 nuts & bolts.
Pack will make 2 splices, has 4 strips of lacing, two pins and enough rivets.
1/4"-20x2-1/4" hex head, nuts: 1/4" -20, steel, hex locknut, zinc plated. For flywheel. Balers: 10, 14T (s/n 32868 & up), 24, 214 (also power take off), 216, 224, 323W
Priced by the pack. Package contains 10 nuts & bolts.
5/16"-18 x 2" hex head, grade 5, plain finish. Shank is wider than 5/16", .340 shank. Nuts are 5/16"-18, steel, hex locknut, zinc plated. Replaces 167494.
Priced by the pack. Package contains 10 nuts & bolts.
1/4"-20 x 1-1/2" hex head, grade 5, plain finish. 1/4" shank. Nuts are 1/4"-20, steel, hex locknut, zinc plated.
Priced by the pack. Package contains 10 nuts & bolts.
Bale Counter Universal, Can be Set in any Position, Push Button Reset. For Balers Using Mechanical Counters, Hardware included.
Arm, Knotter arm with knife. Uses thin .035 inch straight edge knife together with thicker .120 inch guide to strengthen blade and guide twine to cutting edge. Use with plastic or sisal twine.
Rake tooth (7mm) 17-1/2" x 10" x 6". Replacement tooth for P20BG003 & P20BG004. 36133HD / E95724